BOYA BY-WM3D/U Wireless Lavalier Microphone System for iPhone iPad iPod

In stock
SKU: GF-BY-WM3U
Regular price $89.00
Style

Buyer Protection
Full Refund If you don't receive your order
Most of countries can enjoy tax and duty paid by Vlogsfan
USE: GETOFF5 get 5% Off

BOYA BY-WM3D/U Wireless Lavalier Microphone System for iPhone iPad iPod

BOYA BY-WM3 is a 2.4GHz wireless microphone system, a full-featured solution compatible with smartphones, tablets, SLR cameras, consumer camcorders, PCs and more. What makes it special is that it is small in size, long in endurance, and compatible with different devices through a variety of connectors. In addition, BY-WM3 is equipped with a charging box, which can provide storage function while charging the device.Convenient to carry. When the transmitter and receiver are running out of power, you just need to put the device back in the charging case to charge it. The battery has a capacity of 1000 mAh and can be charged through USB-C interface. Lightweight, compact and easy to use, the BY-WM3 is perfect for people such as video producers, video enthusiasts and vloggers.

The main difference between BY-WM3D and BY-WM3U in BOYA BY-WM3 family is that WM3D comes with Apple's Lightning interface, while WM3U comes with Type-C interface. There is no difference in other aspects. Storage box with wireless charging function, microphone receiver and transmitter, 3.5mm TRS audio connector, 3.5mm TRRS audio connector, Apple Linghning connector, windproof sponge, windproof sweater, USB-C charging cable.

Features:-

BY-WM3D/U2.4GHz Wireless Microphone System
> 2.4GHz signal transmission technology
> Open the cover of the charging box and start the machine, automatically connect in seconds
> One key pairing function, quick reset
> Mute the transmitter with one key and the volume can be adjusted
> Lightweight and portable
> Charging box fast charging, improve battery life
> Equipped with various types of adapters, compatible with mobile phones, cameras and other devices

Compact and portable
Both the BY-WM3 Wireless Microphone System transmitter and receiver are extremely small. The size and weight of a single transmitter/receiver are similar to that of a size 5 battery. Even if the receiver is plugged into the audio adapter of the corresponding device, it can be gently pinched with only two fingers.

Induction switch, wireless second connection
The BY-WM3 product box is equipped with an inductive switch design. When you open the lid, the transmitter and receiver can automatically start and enter the working state.

Full power and worry-free endurance
The BY-WM3's transmitter and receiver have built-in 100mA polymer batteries, which can be used for 4.5 hours when the transmitter is fully charged and 9 hours when the receiver is fully charged.

Separate design
The receiver of BY-WM3 wireless microphone system is specially designed to be separated, and the four audio adapters of 3.5mm TRS/3.5mm TRRS/USB Type-C/iOS Lightning can be easily plugged and embedded in the receiver body, so there is no need to worry about the compatibility of BY-WM3 devices.

Built-in silicon microphone for easy pickup
The long wires of the collar clip microphone often make the shooting picture not concise enough, and it takes some time and thought to hide these wires. The transmitter of BY-WM3 has built-in mini and compact silicon microphone, which does not need to be inserted into the lavalier microphone, and does not need to worry about wire interference. Simply pin the transmitter on the neckline, and you can start to enjoy your creation.

Technical Specs:-

> Signal transmission:     2.4GHz
> Polar mode:     Omnidirectional
> Frequency Response:     20-20kHz(±3dB)
> Distortion:     <0.1%
> Sampling rate:     48kHz
> Bit width:     16 bit
> Signal-to-Noise Ratio:     ≥75dB
> Sensitivity:     -42dB±3dB(1dB=1V/Pa@1kHz)
> Operating distance:     20 meters (accessible distance)
> Power consumption:     TX:80mW  RX:60mW
> Endurance:     TX: 4.5 hours × 2
                          RX: 8h × 2
> Charging time:    
                  TX: 2 hours
                    RX: 2 hours

> Charging case: 2 hours
> Charging box interface:     Type-C
> Product battery capacity:    
                    X:100mA
                    RX:100mA

> Charging box: 1000mA
> Size:      
  Charging box: 120 * 77 * 30.5mm (4.7 * 3 * 1.2)
  TX:51.8*15.6*18mm(2*0.6*0.7")
   RX:54*15.6*15.6mm(2*0.6*0.6")
> Charging box weight (including product):     TX + RX + Charging Case: 129g (4.5 oz)


BOYA BY-WM3DBOYA BY-WM3DBOYA BY-WM3DBOYA BY-WM3DBOYA BY-WM3D
BOYA BY-WM3D
BOYA BY-WM3DBOYA BY-WM3D
BOYA BY-WM3D
BOYA BY-WM3DBOYA BY-WM3DBOYA BY-WM3D