RODE VideoMic Go II On-Camera Shotgun Microphone

In stock
Regular price $103.90
Regular price -13% $120.00 Sale price $103.90
Color

Buyer Protection
Full Refund If you don't receive your order
Most of countries can enjoy tax and duty paid by Vlogsfan
USE: GETOFF5 get 5% Off

Shotgun Mic with Directional Sound Pickup
Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.

Easy Hookup to Camera
A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.

Runs on Plug-In Power
No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.

Integrated Shockmount Inhibits Vibrations
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).

Windscreen Minimizes Wind Noise
The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).

Connectivity Options
Expand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.

Specifications

Acoustic & Electrical Specifications

Acoustic Principle
Pressure gradient electret condenser

Polar Pattern
Supercardioid

Frequency Response
20Hz - 20kHz

Output Impedance
2K2Ω

Signal-to-Noise Ratio
79 dBA

Equivalent Noise Level (A-Weighted)
15 dBA

Dynamic Range
95 dBA Typical

Sensitivity
-31dBV(28.78mV @ 94dB SPL) ± 1dB @ 1kHz

Max Input SPL
110 dB SPL

Output Connection
3.5mm TRS

USB-C

Computer Connectivity
USB-C (USB 2.0)

Simultaneous I/O
Stereo input and output when in USB mode

Power Requirements
3.5mm plug-in power 2 - 5V

USB 5V

Bit Depth
24-bit

Sample Rates
48 kHz

Minimum OS Requirements
macOS 10.15

Windows 10 (20H2)

iOS 14

Android 9.0

Mechanical Specifications

Weight (g)
VideoMic GO II: 33

VideoMic GO II with SM8-R: 89

VideoMic GO II and all included accessories: 96

Dimensions (mm)

VideoMic GO II:
Height: 120
Diameter: 21.6

VideoMic GO II and included accessories:
Length: 150
Width: 70
Height: 86


Included Accessories
1 x SC14 3.5mm TRS to TRS cable
1 x Foam Windshield
1 x SM8-R Shockmount